UV SG650AT36 Pro Adjustable Ozone Generator
The output on this machine is fully adjustable from 10 up to 600 mg/h. That means you set it to match the size of the room and how bad the smell is, rather than running a fixed machine flat out. You use only as much ozone as the job needs, and the room is ready to use again sooner. Choose this one when you want to precisely control the ozone output.
It reaches the same 600 mg/h maximum as the SG600 MiniPro. The difference is the single 15 inch tube, which is why the machine is longer — and why the output can be set anywhere between 10 and 600 rather than simply on or off.
The inner chassis is shock-mounted 316 stainless steel, inside a 4 mil scratchproof PVC outer case. With our 6 Year International warranty, it is built to survive years of intense use.
Exclusively made in Canada for ProMedUSA.
UV SG650AT36 Pro Specifications
| Specification | Detail |
|---|---|
| Ozone output (also called Activated Oxygen) | Totally adjustable, from 10 to 600 mg/h |
| Ozone Generation Method | 1 High Output, UV Tube (Made exclusively for ProMedUSA) |
| Warranty | 6 YEARS on the Ozone Generator, 2 YEARS unconditional warranty on the UV Tube (not pro-rated) |
| Coverage area | Hotel guest rooms and similar spaces up to 100 m² |
| Power | 220-240VAC, 50/60 hz; 55 Watts |
| Size and Weight | 63 X 13 X 16 CM; Just 4.2 KG |
| Construction | Shock-mounted 316 stainless steel inner chassis with a 4 mil scratchproof PVC outer case. It is built to survive years of intense use. |
| Timer | 9 Position Electronic LED Timer - automatic settings from 10 minutes to 36 hours |
| Temperature & Humidity Range | −10°C to +50°C. Up to 98% relative humidity |
What It Is Used For
Rooms where the output needs to be matched precisely to the space. Repeat treatments where you want to use less ozone. Sensitive materials and finishes. Smaller spaces where a fixed machine would be too strong.
UV ozone generators are used in empty rooms. Wait a few minutes for the ozone to revert back into plain oxygen before going back into the room.
Tell us about the room size and the source of the smell. We can help assess whether the UV SG650AT36 is suitable for the job.
Warranty
ProMedUSA UV ozone generators carry 6 (six) years on the machine and 2 (two) years on the UV tube with no conditions. If the machine fails inside 6 (six) years we repair it free of charge. If the UV tube fails inside 2 (two) years we replace it free of charge.
Questions People Ask Us
They reach the same maximum output. The difference is control.
The SG600 runs at one level. This one you set anywhere from 10 to 600 mg/h, so you can match the output to the room and the job rather than running flat out every time.
Choose the SG600 for straightforward guest room turnarounds. Choose this one when you are treating sensitive materials, doing repeat treatments, or working in smaller spaces where a fixed machine would be too strong.
Because of the tube. This machine uses a single 15 inch high-output UV tube, which is what makes the output adjustable rather than fixed.
The extra length is the tube, not extra capacity.
Three things.
You use less ozone on jobs that do not need much, so the room is ready to use again sooner.
You can treat sensitive materials and finishes at a low setting over a longer period, rather than hitting them hard.
And you can run repeat treatments on a light setting instead of one heavy one, which suits rooms that need regular attention.
Â
We repair it, free of charge, for six years. The UV tube is covered for two years with no conditions.
Machines we sold in 2010 are still working.
Not Sure Which Size You Need?
Tell us the room and what you are treating, and we will tell you which machine fits and what setting to use.Â
Sometimes the answer is the simpler fixed machine.
We have 20 years experience supplying these all across Singapore, Malaysia, Indonesia, Thailand and ASEAN.